TM 5-4310-452-14
4-96. SAFETY RELIEF VALVE REPLACEMENT.
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions:
Tools/Test Equipment:
• Engine off.
• General mechanic's tool kit
• Access door assembly open.
• System air pressure relieved.
a. REMOVAL
WARNING
Ensure that system air pressure is relieved before removing safety relief valve. Compressed air
can cause serious injury to personnel.
1.
Remove safety relief valve (2) from elbow (3).
Remove elbow from oil separator (1).
2.
Inspect safety relief valve (2) for damage.
Replace if necessary.
b. INSTALLATION
1.
Install elbow (3) in oil separator (1).
2.
Install safety relief valve (2) on elbow (3).
TA505547
FOLLOW-ON TASKS:
• Close access door assembly.
4-195
