TM 5-4310-452-14
4-97. AIR INLET HOSE REPLACEMENT.
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions:
Materials/Parts:
• Engine off.
• Eight lockwashers
• Air pressure relieved.
• Two preformed packings
• Right door assembly open.
• Front end panel assembly removed (see para-
Tools/Test Equipment:
graph 4-82).
• General mechanic's tool kit
a. REMOVAL
NOTE
Air inlet hose may contain oil. Use a suitable container to catch excess oil.
1.
Remove 4 capscrews (6), lockwashers (5), pipe
flanges (4), and air inlet hose (1) from oil
separator (3). Discard lockwashers.
2.
Remove 4 capscrews (9), lockwashers (10), pipe flanges (8), and air inlet hose (1) from air compressor (7).
Discard lockwashers.
3.
Remove 2 preformed packings (2) from ends of air inlet hose (1). Discard preformed packings.
b. INSTALLATION
1.
Install 2 new preformed packings (2) in air inlet hose (1).
2.
Position air inlet hose (1) in place on compressor (7) and oil separator (3).
TA505548
4-196
