TM 5-4310-452-14
5-16. OIL PAN REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Engine off.
• Liquid gasket material (Item 6, Appendix E)
• Engine oil drained (see LO 5-4310-452-12).
• One gasket
Tools/Test Equipment:
• General mechanic's tool kit
a. REMOVAL
NOTE
If engine has been removed, skip step 1.
1.
Remove front belly pan (see paragraph 5-32).
2.
Remove 20 capscrews (3) and washers (2) from oil
pan (1).
3.
Remove screw (6), washer (7), bushing (8), and oil
pan (1) from engine block.
4.
Remove plug (5) from oil pan (1).
5.
Remove gasket (4) from plug (5). Discard gasket.
b.
INSTALLATION
1.
Install plug (5) and new gasket (4) in oil pan (1).
NOTE
Clear all surfaces of engine and oil pan before applying liquid gasket.
2.
Apply a thin coat of liquid gasket material to mounting surface of oil pan (1).
3.
Position oil pan (1) in place on engine block install 20 capscrews (3) and washers (2) in oil pan (1).
4.
Install screw (6), washer (7), and bushing (8).
NOTE
If engine has been removed, skip step 5.
5.
Install front belly pan (see paragraph 5-32).
FOLLOW-ON TASKS:
• Fill engine oil (see LO 5-4310-452-12).
TA505580
5-37
