TM 5-4310-452-14
5-18. OIL LINES REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Front cover removed (see paragraph 5-6).
• One preformed packing
• Oil pan removed (see paragraph 5-16).
• Four lockwashers
• Oil pump removed (see paragraph 5-17).
Tools/Test Equipment:
• General mechanic's tool kit
a.
REMOVAL
1.
Remove 2 bolts (8), lockwashers (6), and nuts (5) from pipe brackets (7). Discard lockwashers.
2.
Remove suction pipe (9) from pipe brackets (7).
3.
Remove capscrew (4) and yoke spring (3) from discharge pipe (2).
4.
Pull discharge pipe (2) out of engine block.
5.
Remove preformed packing (1) from discharge pipe (2). Discard preformed packing.
6.
Remove 2 screws (10), lockwashers (11), and pipe brackets (7). Discard lockwashers.
5-39
