TM 5-4310-452-14
5-34. ROOF SIDE SUPPORT AND DOORSTOPS REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Engine off.
• One lockwasher
• One self-locking nut
Tools/Test Equipment:
• One self-locking screw
• General mechanic's tool kit
a. REMOVAL
NOTE
Use this task to remove any 1 of 3 doorstops or roof side support.
ROOF SIDE SUPPORT
1.
Open right door assembly and access door.
2.
Remove 6 screws (3) from roof side support (2), roof assembly (12), and rear wall baffle (1).
3.
Remove roof side support (2).
DOORSTOP
1.
Open left or right door assembly or access door to gain access to doorstop (5) being removed.
2.
Remove nut (8), lockwasher (7), and lower end of door closure (4) from doorstop (5). Discard lockwasher.
3.
Remove 3 screws (6) from rear panel assembly (11) and doorstop (5).
4.
Remove self-locking nut (10), screw (9), and doorstop (5) from roof assembly (12). Discard self-locking nut and
screw.
b. INSTALLATION
ROOF SIDE SUPPORT
1.
Position roof side support (2) in place on trailer.
2.
Install 6 screws (3) in roof assembly (12), rear wall baffle (1), and roof side support (2).
DOORSTOP
1.
Position doorstop (5) in place on trailer and install new self-locking screw (9) and nut (10).
2.
Install 3 screws (6) in rear panel assembly (11) and doorstop (5).
3.
Insert lower end of door closure (4) in doorstop (5) and install nut (8) and new lockwasher (7).
5-80
