TM 5-4310-452-14
4-12. VALVE COVER REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Engine off.
• Sealing compound (Item 12, Appendix E)
• Left and right door assemblies open.
• One gasket
Tools/Test Equipment:
• One shouldered washer
• General mechanic's tool kit
a. REMOVAL
1.
Remove bolt (1), washer (2), and shouldered washer
(3) from cover (4). Discard shouldered washer.
NOTE
Ensure that all gasket material is
removed from cylinder head and cover.
2.
Remove cover (4) and gasket (5). Discard gasket.
b.
INSTALLATION
1.
Apply sealing compound to new gasket (5). Install gasket in cover (4).
2.
Install cover (4) on cylinder head.
3.
Install bolt (1), washer (2), and new shouldered washer (3).
FOLLOW-ON TASKS:
• Close left and right door assemblies.
TA505425
4-21
