TM 5-4310-452-14
4-11. FLYWHEEL INSPECTION (Con't).
NOTE
Steps 4 and 5 must be performed at the same time.
4. Turn crankshaft pulley (10) counterclockwise one complete revolution with 36 mm socket and breaker bar.
5. Inspect flywheel (3), through access hole (2) in flywheel housing (4), for cracks, chips, or broken gear teeth.
If damaged, notify your supervisor.
6. Install cover (5) on flywheel housing (4), Install 2 bolts (7), new lockwashers (6), 2 bolts (9), new lockwashers (8), and
clamps (1).
FOLLOW-ON TASKS:
• Close left door assembly.
4-20
