Figure 99. Removing the oil intake screen.
(2) Install the lower oil pan (par. 217c) and fill the lubricating system with oil (fig. 16).
219. Oil Pump and Oil Line
a. Removal (fig. 100).
(1) Drain and remove the lower oil pan (par. 217a).
(2) Pull out the cotter pin (27) and remove the oil intake screen (28) from the suction line connection (4).
(3) Remove the two hex head bolts (1) and lockwashers (2) that fasten the suction line connection (4) to the
pump cover. Then remove the two hex head bolts (1), lockwashers (2) and plain washers (3) that attach the
connection to the mounting boss within the upper oil pan and lift out the connection. Discard the connection
gasket (6).
(4) Disconnect the connector (16) and tube assembly (17) from the pump body and crankcase oil passage.
225
