TM 9-4310-394-13
4-29. STARTER REPLACEMENT.
This task covers:
a.
Removal
b.
Inspection
c.
Installation
INITIAL SETUP:
Tools Required
Tool Kit, General Mechanic's (Appendix B, Item 1)
Tachometer (Appendix B, Item 3)
Material's/Parts Required
None
Equipment Condition
Air compressor unit shut down and cool.
a.
Removal. (Refer to Figure 4-19).
(1) Tag and disconnect wires from starter (1).
(2) Remove two screws (2).
(3) Remove starter (1) from engine.
b.
Inspection.
Inspect starter assembly for any obvious damage.
c.
Installation.
(1) Install starter (1) and two screws (2).
(2) Refer to wire tags and reconnect wires to starter (1). Remove wire tags.
4-64
