TM 9-4310-394-13
Table 5-1. Direct Support Troubleshooting.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 3.
Fuel injector pump is not operating properly.
Check that fuel injector pump is operating properly (se paragraph 5-8).
If fuel injector pump is faulty, replace it.
3.
BLUISH-WHITE EXHAUST SMOKE.
Fuel system is not operating properly.
Refer to MALFUNCTION 8, steps 2 and 3.
4.
AIR COMPRESSOR WILL NOT COMPRESS AIR.
Valves and/or valve head are defective.
Replace valves and/or valve head. (Refer to para 5-12.)
Section III. DIRECT SUPPORT MAINTENANCE PROCEDURES
5-6.
DIRECT SUPPORT MAINTENANCE PROCEDURES. Maintenance procedures at direct support maintenance
level include as necessary: removal, cleaning and inspection, repair or replacement, and installation. Unless the
procedure requires special resources or tools, more than one maintenance person or specific equipment conditions,
these are not listed for each maintenance procedure. They are listed only for those procedures that require them.
5-3
