TM9-4310-396-13
MAINTENANCE OF ENGINE STARTER MOTOR
4-19. REPLACE ENGINE STARTER MOTOR.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Equipment Conditions:
General Mechanics Tool Kit
Engine stopped, para. 2-6.8
Storage battery disconnected, para. 4-26
Materials/Parts
None
a. Removal.
(1) Remove exhaust muffler (para. 4-20).
(2) Remove plain hexagon nut (1, Figure 4-7) and flat washer (2) from engine starter motor.
(3) Remove wires (3).
(4) Remove spade terminal wire (4).
(5) Remove cap screws (5) holding engine starter motor (6).
(6) Remove engine starter motor (6).
b. Installation.
(1) Install engine starter motor (6) and cap screws (5).
(2) Install wires (3 & 4).
(3) Install flat washer (2) and plain hexagon nut (1).
(4) Install exhaust muffler (para. 4-20).
4-32
