TM9-4310-396-13
a. Removal. -continued
NOTE
Steps 8 and 9 should only be performed when installing a new tank or parts broken or damaged.
(8) Remove bracket (15) and shock absorber (16) from fuel tank assembly.
(9) Remove loop clamps (17) from liquid gage (18).
(10) If necessary to replace damaged tubing or shutoff screw cock, remove loop clamps (19) from shutoff screw
cock (20) and fuel injection pump (21).
(11) Remove nonmetallic tubing (22).
(12) Remove shutoff screw cock (20).
b. Service.
(1) Remove tank cap (23).
(2) Remove filter element (24) through filler neck.
(3) Install filter element (24).
(4) Install and hand tighten tank cap (23).
c. Installation.
(1) If removed, install loop clamps (19), nonmetallic tubing (22) and shutoff screw cock (20) to fuel injection pump
(21).
(2) If removed, install shock absorber (16) and bracket (15).
(3) If removed, install loop clamps (17), liquid gage (18).
(4) Install gasket (14) and preformed packing (13) on shutoff screw cock (20).
(5) Install fuel tank assembly (12).
(6) Install cap screw (7) and lifting bolt (8).
(7) Install flat washer (11) and plain hexagon nut (10) to shutoff screw cock (20).
(8) Install nonmetallic tubing (4) to liquid gage (18).
(9) Install nonmetallic tubing (4) and loop clamp (3).
(10) Add fuel and check for leaks.
4-39
