TM9-4310-396-13
MAINTENANCE OF FUEL PUMP
4-24. REPLACE FUEL PUMP.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Equipment Conditions:
General Mechanics Tool Kit
Engine stopped, para. 2-6.8
Primary fuel tank drained
Fuel tank assembly removed, para. 4-22
Materials/Parts
Fuel Pump (P/N 714350-51710)
Shim Set (P/N 114250-01800)
a. Removal.
(1) Remove loop clamp (1, Figure 4-12) and nonmetallic tubing (2).
(2) Remove metallic pipe (3).
(3) Remove plain hexagon nuts (4).
(4) Remove fuel pump (5) and shim set (6).
b. Installation.
NOTE
When replacing shim set, place the same number of shims as where removed.
(1) Install shim set (6).
(2) Install fuel pump (5) and tighten plain hexagon nuts (4).
(3) Install metallic pipe (3).
(4) Install nonmetallic tubing (2) and loop clamps (1).
(5) Install fuel tank assembly (reference para. 4-22).
4-43
