TM 9-4310-397-14
1-11. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS.
The information that follows references the location and description of major components found in figure 1-1.
a.
Control Panel (1). Houses the various operating controls and indicators for the unit.
b.
Hose Reel (2). Stores the air hose when not in use.
c.
Batteries (3). Provide power for starting the diesel engine and supply power to the auxiliary power connector.
d.
Radiator (4). Ejects the heat created in the diesel engine and absorbed by the engine coolant.
e.
Oil Cooler (5). Ejects the heat created in the compressor and absorbed by the compressor oil.
f.
Thermal Bypass Assembly (6). Bypasses the oil cooler when the compressor oil temperature is below 150° F
(66° C).
g.
Compressor Oil Separator (7). Separates the oil from the air/oil mixture leaving the compressor.
h.
Compressor (8). Compresses ambient air to a higher pressure and volume (velocity).
i.
Fuel Tank (9). Stores the fuel used by the diesel engine.
j.
Diesel Engine (10). Provides the power needed to operate the compressor.
1-3
