TM 9-4310-397-14
WARNING
Use of standard commercial cap screws to assemble separator can result in cap screws
breaking under pressure causing cover to come off. Personal injury could result.
(c)
Install eight hex head bolts (10) and new lock washers (11) (item 39, appendix H). Do not substitute
standard commercial cap screws for item (10). These are high tensile that meet ASME standards for
pressure vessels.
(d)
Wrap antiseize tape (item 1, section II, appendix E) around threads of adapters (8) and (9).
(e)
Install adapters (8) and (9) in cover (12).
(f)
Wrap antiseize tape (item 1, section II, appendix E) around threaded ends of elbow (7), plug (6), pipe (5),
and adapter (3).
(g)
Install elbow (7) and plug (6).
(h)
Install pipe (5), elbow (4), adapter (3), new preformed packing (2) (item 17, appendix H), and cap (1).
(2)
Install external components.
(a)
Wrap antiseize tape (item 1, section II, appendix E) around threaded ends of elbow (Figure 4-56, 27)
nipple (26), and plug (24).
(b)
Install elbow (27), nipple (26), globe valve (25), and plug (24).
(c)
Wrap antiseize tape (item 1, section II, appendix E) around threaded ends of elbow (23) and valve (22).
(d)
Install elbow (23) and safety valve (22).
(e)
Wrap antiseize tape (item 1, section II, appendix E) around threaded ends of two elbows (16), adapter (20),
and adapter (18).
(f)
Install elbows (16), cross (21), adapter (20), regulator (19), and adapter (18).
(g)
Wrap antiseize tape (item 1, section II, appendix E) around threaded ends of adapter (15), two elbows (11),
and adapter (13).
(h)
Install valve (17), adapter (15), tee (14), elbows (11), adapter (13), and line strainer (12).
(i)
Install hose (10).
(j)
Wrap antiseize tape (item 1, section II, appendix E) around threaded ends of nipple (9) and elbow (7).
(k)
Install nipple (9), cover (8) and elbow (7).
(1)
Coat new preformed packing (6) (item 17, appendix H) with petrolatum (item 12, section II, appendix E).
(m)
Install preformed packing (6), piston (5), spring (4), and cover (3).
(n)
Install two new lock washers (2) (item 25, appendix H) and two hex head screws (1).
4-145
