TM 9-4310-397-14
5-7. SKID AND RUNNER INSPECTION. REPAIR AND REPLACEMENT .-Continued
Figure 5-17. Runner and Skid
(2)
Install 18 cap screws (11), flat washers (10), and new lock nuts (9) (item 20, appendix H).
NOTE
Lift air compressor only high enough to allow runner installation.
(3)
Attach runners (4) to skid (12) with 12 each flat washers (3), new lock washers (2) (item 14, appendix H),
and nuts (1).
(4)
Move air compressor to desired location.
(5)
Install air block (8) with four nuts (5) eight hex washer head bolts (6) and four lock washers (7) (item 4,
appendix H).
5-20