• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 5-8. Motor electric, disassembly
Figure 5-9. Motor, electric, assembly

TM-5-4310-373-14 Compressor Reciprocating Electric Motor Driven 15 CFM 175 PSI C & H Model 20-912 Manual
Page Navigation
  127    128    129    130    131  132  133    134    135    136    137  
TM 5-4310-373-14
5-9. MOTOR, ELECTRlC/ASSEMBLY
This task covers:
The assembly of the electric motor.
INITIAL SETUP
Equipment Condition:
Tools:
Electric motor disassembled
T1 5180-00-177-7033
T2 4910-00-754-0705
Materials/Parts:
Mineral Oil
Approximate Time Required (minutes):
Personnel Required:
45
1 Mechanic
REMARKS
ACTION
LOCATION/lTEM
Attach to motor frame (2)
1. Conduit box (1)
with screws (3).
NOTE
Bearings should be immersed
Heat will expand the bearings making them easier to
in mineral oil heated to a tem-
install.
perature of 600 fahrenheit
prior to installing.
Press onto rotor assembly (8).
2. Bearings (4)
Place into position in end
3. Shim (5)
bell (6).
Attach to motor frame (2).
4. End bell (6)
Be sure end bell and motor frame line up as marked in
disassembly procedure. See para 5-8.
Install.
5. Baffle (7)
Install in motor frame (2).
6. Rotor assembly (8)
Install on shaft.
7. Wavy washer (9)
Attach to motor frame (2).
8. End bell (10)
Install.
9. Thru bolts (11)
Fasten to thru bolts (11) and
Motor shaft should spin freely when turned by hand.
10. Nuts (12)
tighten.
5-22






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.