• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 5-8. High pressure tube, disassembly and reassembly.
Figure 5-9. Transfer pump. disassembly and reassembly.

TM-5-4930-207-34 Lubricating and Servicing Unit Power Operated Trailer Mounted 23 CFM Compressor Reciprocating Gasoline Driven (Henry Spen Model 901765-1) Manual
Page Navigation
  21    22    23    24    25  26  27    28    29    30    31  
TM 5-4930-207-34
TRANSFER PUMP
Section VI.
(2) Inspect washer (18) to see if clean and
5-18.  General
it fluctuates easily when reassembled.
The transfer pump is an air operated device used
(3) Inspect two packings (10) for wear or
for transferring lubricants from original drums
damage.
to the lubricant tanks.
(4) Inspect  a l l t h r e a d e d s u r f a c e s f o r
5-19. Transfer Pump Removal
scratches, burrs, or wear.
a n d Disassembly
(5) Inspect pump rods and tubes for bends,
a. Removal. Refer to TM 6-4930-207-12 for
breaks, or other damage.
removal instructions.
b. Repair. Repair is made by replacement,
b. Disassembly. Refer to figure 5-9 and disas-
semble the transfer pump in numerical sequence
5-21. Transfer Pump Reassembly and
as illustrated.
Installation
5-20. Transfer Pump Inspection and
a. Reassembly. Refer to figure 5-9 and reas-
Repair
semble in reverse order of removal.
a. Inspection.
b. Installation. Refer to TM 5-4930-207-12
(1) Inspect base valve (9) to see if it is free
and install the transfer pump as instructed.
from dirt and foreign matter.
Key to-Figure 5-9. Transfer pump, disassembly and reassemby.
5-12






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.