TM 9-4310-397-14
6-7. ENGINE OIL PAN INSPECTION AND REPLACEMENT. - Continued
c Installation.
(1)
Place new gasket (5) (item 54, appendix H) on flange face.
(2)
See cap screw length positions noted at disassembly and install oil pan (4) with twenty four cap screws (1)
new lock washers (2) (item 43, appendix H) and straps (3). Torque cap screws to 35 ft-lb (50 Nm).
(3)
Place aluminum washer (7) on plug (6) with raised center against plug.
(4)
Install plug (6) and washer (7) in oil pan.
(5)
Install engine per paragraph 4-72.
6-34
