f. Remove the carbon deposits from the inlet valve guard at the cylinder top. Take care that no dirt drops into the
g. Clean and inspect all the parts. Discard any valve disks that are cracked or worn.
a. Fit a new rubber cord joint (3). Do not stretch the rubber while inserting it in its groove; the ends should meet.
Lightly smear the cords, O-rings and their grooves with graphite grease.
b. Put inlet valve disk (6) into place and install valve seat (7).
c. Fit O-ring (5) and cord joint (1).
d. Install outlet valve disk (8), guard (9) and spring (10).
e. Install cylinder head cover (11). Use new flange gaskets, if necessary. Fit the flange and cylinder head bolts and
tighten them alternately.
f. Reinstall the cover of the air intake silencer, the air filter, the retaining cover and the knob or oil filler cap.
g. Run an operational check on the unit.
6. List of Recommended Spare Parts For Air Compressor (Model 3LE6A). The following is a list of spare parts
recommended by the manufacturer to be carried in the field.
5 ltr cn