*TM 3-1040.244-34
(2) Remove the packing (11) from the
drain plug (12).
(3) Straighten hooks (22 and 25) enough
to permit removal of the hooks from
the cap assembly (26), chain (23), and
tank (9).
(4) Unscrew and remove cap assembly
(26) from the fuel tank (9).
(5) Remove the packing (24) from the cap
assembly (26).
c.
Cleaning and Inspection.
(1) Clean metallic parts in dry-cleaning
solvent (P-S-661). Dry with clean,
filtered compressed air.
(2) Inspect components for damaged
threads or other defects.
(3) Replace packing (24) and packing (11)
during assembly.
d. Lubrication. Apply oil (MIIL-2104, grade 30)
to packing (27) during assembly.
e.
Assembly.
(1) Position packing (24) on cap assembly
(26).
(2) Screw cap assembly (26) on the inlet
port of fuel tank (9).
(3) Attach hooks (22 and 25) to chain (23).
Bend hooks to prevent loss of the
chain.
(4) Attach hook (22) to the fuel tank (9)
and hook (25) to the cap assembly
(26). Bend hooks to secure the chain
(23) to both the fuel tank and cap
assembly.
(5) Position packing (11) on drain plug
(12). Screw drain plug with packing
installed into drain port of the fuel tank
(9).
f.
Installation.
(1) Position fuel tank (9) in frame (13).
Secure tank with four brackets (21),
capscrews (20), and nuts (10). Install
clamp (8) with screw (3), washer (4),
and nut (7).
(2) To assemble filter (6) and tube
Figure 2-5. Frame and fuel tank group, exploded view.
assembly (7) refer to paragraph 2-9 (4)
through (6).
b.
Disassembly.
(1) Unscrew and remove drain plug (12)
from the drain port of the tank.
13
