TM 3-4310-100-20 & P
CHAPTER 1
INTRODUCTION
Section I. GENERAL
1-1. Scope
1-2. Record and Report Forms
a. Equipment maintenance forms and procedures
These instructions are for use by organizational
maintenance personnel. They apply to Compressor Unit.
for their use are prescribed in TM-38-750.
b. Refer to TM 43-0002-31 for destruction
Reciprocating Power-Driven, Flamethrower, 3-1/2 CFM.
AN-M4 (Walter Kidde) NSN 4310-00-592-8560: AN-
instructions on this equipment.
M4B (Stewart-Warner) NSN 4310-00-848-6075;
AN-
c. Refer to TM 740-90-1 for administrative
M4C (Stewart-Warner) NSN 4310-00-078-5431 and AN-
storage instructions on their equipment.
M4D
(Walter
Kidde)
NSN
d. Refer to TM 43-0139 for painting instructions
on this equipment.
Section II. DESCRIPTION AND DATA
instruction plates are contained in operator's manual TM
1-3. Description
3-4310-100-10. The following paragraphs describe the
a. General. A general description of AN-M4, M4
major components of the compressor units (fig. 1-1).
AN-M4B, AN-M4C. and AN-M4D. Compressor unit
models. and information on identification plates and
1-1
