TM 5-4220-233-144-60. SPARE TIRE WINCH ASSEMBLY.This Task Covers:a. Replacementb. RemovalINITIALSETUP:ToolsMaterials/Parts Appendix DSocket Wrench Handle, 3/8" DriveNoneSocket, 9/16"Socket, 9/16'Wrench, Torque 0-150 ft/lbsEquipment ConditionsWrench, 9/16"Spare Tire Removed ( Paragraph 3-5)Wrench, 11/16" 2 eachWrench, 15/16"a. Removal.Figure 4-52. Replace Spare Tire Winch Assembly.WARNINGEnsure safe working load of all rigging equipment Is sufficient before lifting BodyAssembly from Trailer Assembly. Failure to follow this warning may result Inpersonnel injury, death, or damage to equipment.(1)Remove six bolts, attaching nuts, and bevel washers that secure the body to the Trailer Assembly.(2)Lift and remove Body Assembly from Trailer Assembly.(3)Loosen and separate cable crimping nut (1) from cable (2) on winch (3) and pull cable through holddown bracket.(4)Remove two screws (5) and attaching nuts (6) and washers (7) securing winch assembly (3) to chassis brackets (8).(5)Note routing of cable, then pull winch assembly(3) out from between chassis brackets (8).4-97
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business