TM 5-4220-233-14
4-57. FRONT SWIVEL JACK.
This Task Covers:
a. Replacement
b. Removal
c. Installation
INITIAL SETUP:
Tools
Materials/Parts Appendix D
None
None
Equipment Conditions
None
a. Removal.
Figure 4-49. Replace Front Swivel Jack.
WARNING
Prior to performing this task the Servicing Unit should be positioned on a hard flat
surface with the rear swivel jacks lowered, handbrake applied, wheels chocked,
and drawbar blocked up to provide a firm stable foundation. Failure to follow this
warning may result In serious personnel injury or equipment damage.
(1)
Pull quick-release pin (1) out of swivel jack (2) and pull jack off of chassis (3).
b. Installation.
(1)
Insert mounting tube (4) on new swivel jack (2) with over mounting tube on chassis (3). Position jack
(2) with sandshoe down.
(2)
Insert quick-release pin (1) to secure jack (2) to chassis (3).
(3)
Lower sandshoe using handle until contact with ground is made.
4-94
