TM 5-4220-233-14
(4)
Install lens (2) on light housing (3) and secure with two screws (1).
b. Light Removal.
(1)
Disconnect connector on light (5) from wire harness (6).
(2)
Loosen two screws (1) and remove lens (2) from light housing (3).
(3)
Remove four screws (7), nuts (8), and washers (9). Then, detach light housing and spacer plate (10)
from chassis (11).
c. Light Installation.
(1)
Loosen two screws (1) and remove lens (2) from light housing (3).
(2)
Mount light housing (3) and spacer plate (10) on chassis (11) and secure with four screws (7), nuts (8)
and washers (9).
(3)
Install lens (2) on light housing (3) and secure with two screws (1).
(4)
Connect connector on light (5) to wire harness (6).
4-92
