(4) When repair parts are source coded "C",
balization; if not obtainable through
the manufacturer's part number will be
cannibalization, such repair parts will
used for local procurement.
be requisitioned with supporting justi-
Note. When a minimum stockage sufficient to
fication through normal supply channels.
repair one item and/or assembly is authorized,
Note. Source coding is not shown on com-
this quantity will be indicated in the Description
mon hardware items known to be readily avail-
column with the notation "minimum stockage of
able in Army Supply Channels and through
is authorized".
local procurement.
d. Unit of Issue. If no abbreviation is shown in
(3) Maintenance.
this column, the unit of issue is "each".
(a) The lowest maintenance level authorized
to manufacture, assemble, and/or install
e. Quantity Incorporated in Unit. The actual
the part is indicated by one of the fol-
number of parts used in the application indicated is
lowing code symbols:
shown in this column. A zero (0) is shown when
O-Organizational Maintenance
components of kits or sets are listed that are not
F--Direct Support Maintenance (DS)
applicable to this specific end item.
H--General Support Maintenance (GS)
f. 15-Day Organizational Maintenance Allow-
D--Depot Maintenance
ante. Shown for each repair part is either a quantity
(b) This column is left blank when com-
or an asterisk allocation which indicates the fol-
ponents of kits or sets are listed that are
lowing:
not applicable to the item of equipment,
(1) A guide quantity factor is shown for each
or when an item is source coded X 1.
repair part authorized to be stocked by
(4) Recoverability. Repair parts and/or tool
organizational maintenance. This quantity
and equipment items that are recoverable
is based on past experience with similar
are indicated by the following code symbol:
items and the latest mortality data for
R--applied to repair parts and assem-
1000 hours operation per year. It is the
blies which are economically repairable at
average quantity required to provide one
direct and general support maintenance
prescribed load for 15 and/or 6-10 items
activities and normally are furnished by
of equipment for a 15-day period under
supply on an exchange basis.
average combat conditions.
Note. When no code is shown in the recover-
Note. Combat essential items which must be
ability column the part is considered expendable.
stocked or on order at organizational maintenance
b, Federal Stock Number. When a Federal stock
at all times, regardless of demand, will be identi-
fied in the allowance column by a quantity in
number is available for a part, it will be shown in
parentheses.
this column and will be used for requisitioning
(2) The quantity of repair parts authorized for
purposes.
stockage in accordance with the number of
c. Description.
prescribed loads authorized by the major
(1) The item name and a brief description of
c o m m a n d e r are determined by using
the part are shown.
(2) A five-digit Federal supply code for manu-
(3) Table 1 is a consolidation of items quanti-
facturers and/or other supply service is
tatively allocated in this manual. Quanti-
shown followed by the manufacturer's
ties listed are for one prescribed load for
part number. This number will be used for
a 15-day period. A minimum stockage suf-
requisitioning purposes when no Federal
ficient to repair one item and/or assembly
stock number is indicated in the Federal
is authorized (e.g., if 3 belts are required,
stock number column.
then 3 belts are allocated as the minimum
Example: 0864586453
stockage). This quantity will be indicated
(3) Repair part quantities included in kits,
in the minimum stockage authorization
column.
sets, and assemblies, that differ from the
actual quantity used in this specific end
(4) Units and organizations authorized more
item, are listed in parentheses.
than one prescribed load will multiply the
58