CHAPTER 3
OPERATOR AND ORGANIZATIONAL
MAINTENANCE INSTRUCTIONS
Section I. OPERATOR AND ORGANIZATIONAL
MAINTENANCE TOOLS AND EQUIPMENT
3-2. Basic Issue Equipment
No special tools or equipment are required
Equipment with, or authorized for use with,
by operator or organizational maintenance per-
the rotary compressor is listed in the basic is-
sonnel for maintenance of the rotary compres-
sue items list, appendix B of this manual.
sor.
Section II. LUBRICATION
3-3. General Lubrication Information
water, or foreign material to mix with the lu-
bricant at any time. Keep all lubrication equip-
a. This section contains a reproduction of
ment clean and ready for use.
the lubrication order and lubrication instruc-
tions which are supplemental to, and not spe-
b. Cleaning. Keep all external parts not re-
cifically covered in, the lubrication order.
quiring lubrication clean of lubricants. Be-
fore lubricating the equipment, wipe all lubri-
cation points free of dirt and grease. Clean all
is an exact reproduction of the approved lubri-
lubrication points after lubrication to prevent
cation order for the rotary compressor. For
accumulation of foreign matter.
the current lubrication order, refer to DA
c. Points of Application. Detailed lubrica-
pamphlet 310-4.
tion instructions for the engine are contained
3-4. Detailed Lubrication Information
in TM 5-2805-208-14. Follow the detailed lubri-
cation instructions given beneath each illus-
trated lubrication point indicated in the current
oil ) in closed containers and stored in a clean,
lubrication order, figure 3-1.
dry place away from heat. Allow no dirt, dust,
