c. Reassembly
case with four (4) screws only, do
not tighten completely.
(1) Assemble drive-end headplate to im-
(6) Assemble bearing plate to gear-end
peller case, insert dowel pins and
and drive end.
fasten headplate with 4 screws only,
(7) Assemble timing gears.
do not tighten bolts down completely,
(8) Fasten all headplate bolts and torque
(2) Insert both impeller shaft assemblies,
to 20 ft. lbs.
(9) Time impellers, refer to paragraph
(3) Assemble gear-end headplate and in-
sert dowel pins.
(10) Assemble gear case.
(4) Insert bearings on both ends, (fig
(11) Lubricate in accordance with cur-
(5) Fasten gear-end headplate to impeller
rent lubrication order.
6-8
