TM 5-4310-275-14
(2) Clean corroded areas with a wire brush
d. Installation.
and abrasive cloth.
(1) Refer to Figure 4-11 and install the
housing sections in reverse sequence of removal.
(3) Inspect the decals for legibility.
c. Repair.
( 2 ) Install the fuel tank.
(1) Remove the illegible decals from the
housing sections (fig. 4-11).
stallation
(2) Apply paint, olive drab color No.
a. Removal.
X24087, Federal Standard 595A, per MIL-T-
(1) Refer to Figure 5-1 and remove the air
704E, to the bare metal surfaces.
pressure tank.
(3) Apply new decals to the positions in-
dicated in Figure 4-11.
