TM 5-4310-275-14
(1) Clean the panels with dry cleaning
WARNING
solvent, Fed. Spec. P-D-680.
Dry cleaning solvent, Fed. Spec. P-D-680
(2) Inspect for legibility of the instructions
or P-S-661, used to clean parts is
plates.
potentially dangerous to personnel and
(3) Replace any deformed panel assembly.
property. Avoid repeated and prolonged
c. Installation.
skin contact. Do not use near open flame
(1) Refer to Figure 4-11 and install the panel
or excessive heat. Flash point of solvent
is 100 F. (38 C.) --138 F. (59 C.).
assemblies.
(2) Install the towing attachment.
b. Cleaning and Inspection.
