TM 5-4310-278-15
Section XIII. ENGINE BASE, FRAME, AND TOOL BOX
(2) Inspect tool box for cracks, distortion,
3-33. General
damaged or rusted hinges, or other damage.
The engine base is shock mounted to the
(3) Inspect shock mounts for cracks, loss
tubular frame crossmembers. The axle is weld-
of resilience, or deterioration.
ed to the tubular frame. The tool box is bolted
(4) Inspect engine base for cracks, broken
to angles welded between the tops of tubular
weldments, distortion or other damage.
crossmembers of the frame.
(5) Inspect tubular frame for cracks, mis-
alignment, cracked weldments, damaged axle
threads, and other damage. Straighten all bent
a. Disassembly.
parts. Replace parts damaged beyond repair.
(1) Remove rotary compressor (para 3-
28a).
c. Reassembly.
(2) Remove engine (para 3-30a).
(1) Refer to figure 3-12 for reassembly
(3) Remove wheels and wheel bearings
of engine base and tool box on tubular frame.
(2) Install wheels and bearings (para 3-
(4) Refer to figure 3-12 for disassembly
32c).
of engine base and tool box from frame.
(3) Install engine (para 3-30c).
b. Cleaning and Inspection.
(1) Clean all parts with an approved
(4) Install rotary compressor (para 3-
cleaning solvent; dry thoroughly.
28c).
