TM 5-4310-335-14
Figure 6-13. Timer Box Control Setting Setup.
actuates (lever in UP position). Secure the bracket with jam nut (21).
NOTE
Do not install screw (17) at this time.
(m) Relieve the pressure applied at the plug port and reactivate the lever to the DOWN position.
(n) Screw in plug (2) until the plunger lifts the actuator knob 0.010 inch (.0254 cm)-0.030 inch (.0762
cm). Secure the plug with jam nut (1).
(o) Slowly apply 3050 psi (214.4150 kgs per sq cm)-3150 psi (221.4450 kgs per sq cm) psi to the port in
plug (2). Secure the actuator knob to the plunger using screw (17). Maintain
6-22
