Figure 3-2. Motor, cleaning, removal and installation
deglazing. If deglazing appears necessary, remove the
b. Inspection
back beltguard (para 3-5).
(1) Inspect the shaft for movement (end play).
(2) Loosen belt adjustment screw (fig. 1-2) and
(2) Notify organizational
maintenance of a
nuts securing. motor to receiver. Move motor toward
defective motor.
compressor, then lift belts off of the pulleys..
3-7. V-Belts (Matched Pair)
b. Cleaning.
a. Inspection
(1) Use a cloth dampened in cleaning solvent
(1) Make a visual inspection of belts condition
to determine if the belts. require removal for cleaning and
3-5
