1.
Air compressor,
2.
Capscrew (4)
3.
Lockwasher.(4)
4.
Hose support
Figure 4-2. Air compressor, removal and installation
(4) Lift the air compressor (1) off the air
(4) Install the two remaining lockwashers (3)
receiver.
and capscrew is (2) in base of compressor. Tighten the
four mounting capscrews to the torque value given in
c. Installation.
ceiver (fig. 4-41.
(1) Check that the air compressor is completely
(5) Install V-belts:(para 4-9 above).
assembled and that fan wheel is properly installed.
4-11. Pilot Valve Replacement
(2) Position compressor on the air receiver.
a. Removal.
(3) Position hose support (4, fig. 4-2) on base
of frame and secure with two lockwashers (3) and
(1) Disconnect tube (1. fin. 4-3).
capscrews (2).
4-4
