TM 5-4310-354-14
b. Disassembly. Disassemble the oil filter-thermal
bypass valve assembly in the numerical sequence
shown in figure 6-7 as follows:
TS5-4310-354-14/6-6
REMOVAL
STEP 1.
DISCONNECT OIL HOSE ASSEMBLIES.
REMOVE ELBOWS, ADAPTER, AND
REDUCING BUSHINGS, AS NECESSARY.
STEP 2.
REMOVE CA P SCREWS AND LOCK
WASHERS.
REMOVE OIL FILTER-
THERMAL BYPASS VALVE ASSEMBLY
AND GASKET. DISCARD GASKET.
INSTALLATION
STEP 1.
USE A NEW GASKET AND INSTALL
GASKET AND OIL FILTER-THERMAL
BYPASS VALVE ASSEMBLY IN POSITION
ON SIDE OF COMPRESSOR. SECURE
WITH LOCK WASHERS AND CAP
SCREWS.
STEP 2.
AS NECESSARY, INSTALL REDUCING
BUSHINGS, ADAPTER, AND ELBOWS.
CONNECT OIL HOSE ASSEMBLIES.
Figure 6-6. Oil filter-thermal bypass valve assembly,
removal an installation.
6-11
