TM 5-4310-360-14
Section Ill. MAINTENANCE PROCEDURES
3-8.
Belt Guard, V-Belts and Pulley.
3-6. General.
Inspect the belt guard (1) for dents, cracks,
a.
Instructions in this section are published for the
or other damage. Straighten minor dents and
information and guidance of the operator to
bends in the guard.
maintain the air compressor.
Inspect all attaching hardware for damaged
b.
threads.
Fuel Tank, Lines and Fittings.
3-7.
Check all fittings (1) for leaks and tighten if
a.
necessary.
Check cover gasket for leaks and replace if
b.
necessary.
If leak is found in fuel tank (2), report to
C.
higher authority.
Clean fuel tank strainer.
d.
Inspect the V-belts (2) for cuts, fraying and
C.
wear.
Inspect the pulley (3) for cracks or loose
d.
ness.
3-9.
Air Cleaner and Oil Filler.
Removal.
a.
(1) Stop the engine.
(2)
Remove the compressor air cleaner
from the cylinder head by turning
counterclockwise.
(3)
Remove the oil level gage from the
compressor crankcase.
3-10
