TM 5-4310-360-14
Section Ill. GENERAL MAINTENANCE
5-6. General.
parts being repaired to insure strict
adherence to criteria established by this
Refer to Chapters 3 and 4 for operator and organi-
manual.
zation preventive maintenance checks and services.
b.
Welding shall assure complete fusion and
penetration and be in compliance with
5-7.
General Disassembly Procedures.
specifications and standards referenced
herein.
a.
Components to be repaired shall be disas-
sembled to the extent required for complete
serviceability.
5-9.
General Reassembly Procedures.
b.
Serviceable, precision, matched or mated
parts shall be marked, handled and stored
to preclude damage and to insure reassem-
General precautions shall be adhered to
a.
bly and installation in their matched and
during reassembly to insure that all internal
mated positions in the same assembly or
parts have been properly installed and
component.
necessary tolerance checks performed.
General Repair and/or Replacement Criteria.
5-8.
Upon completion of reassembly, unit shall
b.
In-process inspection shall be performed on
a.
be lubricated in accordance with Lubri-
each assembly, subassembly and component
cation Order.
5-3(5-4 Blank)
