TM 5-4310-362-14
LOCATION/ITEM
ACTION
REMARKS
8-20.
ASSEMBLY
1.
Oil level gage (25)
Install in crankcase (26).
If removed after inspection.
2.
Oil seal (24)
Install in crankcase (26).
3.
Crankshaft bearings (23)
Install on crankshaft (22).
If removed after inspection.
4.
Crankshaft (22)
Install in crankcase (26).
5.
Breather element (21)
Install in breather chamber cover
and oil separator (20)
(15).
6.
Shims (19), (18), gas-
a. Assemble together and place
kets (16), covers (17)
into position on crankcase (26).
and (15)
b. Attach with capscrews (14).
7.
Crankshaft (22)
Turn over by hand.
Crankshaft should spin freely.
Correct crankshaft adjustment
is made by adding or removing
shims (18) and (19).
8.
Pistons (13) and con -
Assemble with piston pin (12)
necting rods (10)
and retainers (11).
CAUTION
Connecting rods and caps are
a matched set and must be
installed as marked during
disassembly procedure.
8-30 Change 1
