TM 5-4310-362-14
LOCATION/ITEM
ACTION
REMARKS
NOTE
Connecting rods and caps are a
matched set and must be
installed on crankshaft in the
same position they originally
occupied.
Oil
dippers
are
not
interchangeable and must be
installed in the same position
they originally occupied.
10. Connecting rods (10)
Mark and note position in rela-
To insure they will be installed
and dippers (9)
tion to crankshaft.
correctly.
11. Capscrews (8), dippers
Remove.
Repeat steps 9 through 14 for
(9), caps (10)
each piston, connecting rod
assembly.
12. Pistons and connecting
Remove through top of crank-
rods (10)
case.
13. Retaining rings (11)
Remove.
14. Piston pins (12)
Remove.
15. Pistons (13)
Remove from connecting rods
(10).
16. Capscrews (14)
Remove.
17. Breather chamber
Remove.
cover (15)
18. Gasket (16)
Discard.
Used gaskets do not seal.
19. Crankcase cover (17)
Remove.
20. Gasket (16)
Discard.
Used gaskets do not seal.
21. Shims (18) and (19)
Remove.
8-26 Change 1
