TM 5-4310-362-14
LOCATION/ITEM
ACTION
REMARKS
5.
Crankshaft
a. Inspect for cracks, scoring or
excessive wear.
b. Replace if cracked, scored,
or excessively worn.
6.
Connecting rods
a. Check for fit.
Repeat step 6 for all connecting
rods.
1.
Install connecting rod with
piston to crankshaft.
2.
Tighten connecting rod
capscrews to 10 ft-lbs.
3.
Combined piston and con-
necting rod should turn
slowly on the crankshaft
of their own weight.
b. If connecting rod fit is too
loose, replace connecting rod.
7.
Breather filter and
Replace if cleaning is not effec-
silencer
tive.
8.
Oil level gage
a. Inspect for cracked glass or
Oil level gage should be removed
unreadable scale.
only if defective.
b. Replace if glass is cracked or
scale is unreadable.
Change 1 8-29
