TM 5-4310-362-14
AIR RECEIVER AND AIR DISCHARGE SYSTEM (cont)
LOCATION/ITEM
ACTION
REMARKS
6. Drain cock (6)
a. Inspect for:
(1) Damaged threads.
(2) Corrosion.
b. Replace if either of these
defects are found.
c. Clean up minor corrosion
with wire brush.
7. Air tank (7)
a. Inspect for corrosion and
peeling paint.
WARNING
Eye protective equipment
must be worn when scrap-
ing rust and loose paint.
b. Remove corrosion and loose
paint with wire brush.
c. Prime and repaint affected
areas.
10-7. INSTALLATION
1. Pipe nipple (1)
Screw into tank.
2. Globe valve (2)
Screw onto nipple.
3. Reducer bushing (3)
Screw into globe valve.
4. Adapter (4)
Screw into bushing.
5. Hose (5)
Screw onto adapter.
6. Inflator gage (6)
Screw onto hose.
7. Reducer bushing (7)
Screw into air tank.
8. Nipple (8)
Screw into bushing.
9. Tee (9)
Screw onto nipple.
10. Safety relief valve (10)
Screw into tee.
11. Nipple (11)
Screw into tee.
10-6 Change 1
