TM 5-4310-362-14
AIR RECEIVER AND AIR DISCHARGE SYSTEM (cont)
LOCATION/ITEM
ACTION
REMARKS
10-6. CLEANING, INSPEC-
TION AND REPAIR
a. Inspect for:
1. Air hose (1)
(1) Cuts
(2) Damaged threads on fit-
tings causing air leakage.
b. Replace hose if it shows any
of these defects.
2. Inflator gage (2)
a. Inspect for:
(1) Cut hose whip
(2) Cracked gage gl ass.
(3) Unreadable gage.
(4) Conditions which would
cause leaks.
(5) Damaged threads;
b. Replace inflator gage if it
shows any of these defects.
3. Globe valve (3)
a. Inspect for:
(1) Resistance to turning of
hand wheel.
(2) Damaged threads.
b. Replace valve if it shows
either of these defects.
4. Pressure gage (4)
a. Inspect for:
(1) Cracked glass.
(2) Bent needle.
(3) Unreadable scale.
(4) Fluid leak.
b. Replace gage if it shows any of
these defects.
5. Safety relief valve (5)
a. Inspect for:
Indication that factory adjustment has
(1) Corrosion of internal
been changed.
pans.
(2) Damaged threads.
(3) Missing lead and wire
seal.
b. Replace valve if conditions
(1) or (2) are found.
c. Check adjustment if condi-
tion (3) is found.
Change 1 10-5
