TM 5-4310-368-14
Table 2-2.
Preventive Maintenance Checks and Systems (Continued)
B - Before Operation
D - During Operation
A - After Operation
W - Weekly
M - Monthly
INTERVAL
EQUIPMENT WILL
ITEM
ITEM TO BE INSPECTED
BE REPORTED
NO.
B
D
A
W
M
PROCEDURE
NOT READY IF
Belts loose or damaged. Do
Engine drive belts. Inspect belts for wear,
4
not operate until belts are
fraying, peeling and belt tension. Inspect tension
replaced.
by pressing down on the belts halfway between
the engine pulley and the compressor flywheel. If
the depression is more than 1/2 inch (13 mm),
adjust the belt tension. Refer to organizational
PMCS for adjustment procedures.
2-6
