TM 5-4310-368-14
i.
Gear Cover. (Figure 6-14)
(1) Remove ten 5/16-18" x 1 1/4" screws, eight spring lock washers and two external tooth lock washers.
(2) Remove two 5/16-18" x 3/4" screws and lock washers.
(3) Rap gear cover with soft hammer to break seal and remove gear cover.
(4) Remove five 5/16-18" x 5/8" screws, three 5/16" lock washers and two 5/16" flat copper washers.
(5) Remove gear cover spacer.
(6) Remove two dowel pins.
(7) Remove oil seal from gear cover.
Figure 6-14. Gear Covers
6-11
