TM 5-4310-368-14
Section IV. COMPRESSOR ASSEMBLY
6-11.
GENERAL
The compressor is a four stage, four cylinder, single acting, reciprocating, belt driven, air cooled compressor with a
rated capacity of 15 SCFM at 3500 PSI.
6-12.
REMOVAL
Remove the compressor from the frame.
a.
Removal
(1)
Drain compressor oil. (Figure 6-38)
(2)
Remove enclosure roof. (Figure 6-39)
(3)
Remove side access panel. (Figure 6-39)
(4)
Disconnect air cleaner at compressor.
(5)
Remove drive belts. (Figure 6-40)
(6)
Disconnect oil drain hose at compressor.
(7)
Remove four nuts and washers.
(8)
Disconnect all gage tubing at compressor.
(9)
Disconnect air line at aftercooler.
(10) Disconnect condensate drain tubes.
(11) Disconnect main wiring at two solenoid valves.
(12) Attach lifting device and remove compressor. (Figure 6-41)
6-33
