TM 5-4310-369-14
This time includes preparation time, troubleshooting time,
C-4.
Column Entries Used in Tool and Test Equipment
and quality assurance/quality control time in addition to
Requirements
the time required to perform the specific tasks identified
a. Column 1, Tool or Test Equipment Reference Code.
for the maintenance functions authorized in the mainte-
The tool and test equipment reference code correlates with
nance allocation chart. The symbol designations for the
a maintenance function on the identified end item or com-
various maintenance levels are as follows:
ponent.
b. Column 2, Maintenance Level. The lowest level of
C. . . . . . . . Operator or crew
maintenance authorized to use the tool or test equipment.
O . . . . . . . . Organizational maintenance
c. Column 3, Nomenclature. Name or identification of
F. . . . . . . . Direct support maintenance
the tool or test equipment.
H. . . . . . . . General support maintenance
d. Column 4, National/NATO Stock Number. The
D. . . . . . . . Depot maintenance
National or NATO stock number of the tool or test
e. Column 5, Tools and Equipment. Column 5 specifies,
equipment.
by code, those common tool sets (not individual tools) and
e. Column 5, Tool Number. The manufacturer's part
special tools, test, and support equipment required to per-
number.
form the designated function.
f. Column 6, Remarks. This column contains a letter
C-5.
Explanation of Columns in Section IV.
code in alphabetical order which is keyed to the remarks
a. Reference Code. The code scheme recorded in
contained in Section IV.
Column 6, Section II.
b. Remarks. This column lists information pertinent to
the maintenance function being performed as indicated on
the MAC, Section II.
C-2