TM 5-4310-369-14
DIRECT SUPPORT MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL TOOLS AND EQUIPMENT
and special tools list TM 5-4310-369-24P and
Special Tools and Equipment
No special tools are required to perform direct and
TM 5-2805-256-24P (Engine).
general support maintenance on the compressor.
6-3.
Fabricated Tools and Equipment
No specially fabricated tools and equipment are required
6-2.
Repair Parts
Repair parts are listed and illustrated in the repair parts
by direct and general support maintenance personnel to
perform maintenance on the compressor.
Section II. PREVENTIVE MAINTENANCE CHECKS AND SERVICES
Refer to Chapter 5 for preventive maintenance
checks and services.
Section III. TROUBLESHOOTING
Refer to Chapters 4 and 5 for troubleshooting tables.
Section IV. MAINTENANCE OF ENGINE ASSEMBLY
Engine
For complete overhaul information, see TM 5-2805-256-14.
Section V. MAINTENANCE OF PNEUMATIC EQUIPMENT
6-7.
Description
b. Nut and Bolt Torque Data for Compressor (Dry
For a complete description of the air compressor, see
Threads)
Ft-Lbs (Dry)
Tabulated Data
Cylinder head bolts . . . . . . . 24
a. General. This paragraph contains all the overhaul data
Cylinder to base bolts . . . . . . 24
Hand hole plate . . . . . . . . 12
pertinent to direct and general support and depot mainte-
nance personnel.
Flywheel setscrew . . . . . . . 44
Connecting rod bolts . . . . . . 14
Hand hold plate bolts . . . . . . 12
