TM 5-4310-371-14
b. Remove globe valve from air receiver by turning it counter clockwise from air receiver nipple (figure 4-10).
c. To replace globe valve apply thread tape or thread compound to threads of bushing, and with arrow on globe
valve pointing away from air receiver, turn globe valve clockwise into air receiver nipple until tight. Turn globe
valve until handle is up.
d. Install the inflator gage hose by turning the bushing clockwise into the globe valve.
e. Check packing of globe valve for leak around packing nut with valve open and pressure in air receiver. Use soap
and water applied at top of nut, look for bubbles.
f. Tighten packing nut.
TM 5-4310-371-14/4-10
FIGURE 4-10. GLOBE VALVE REMOVAL AND REPLACEMENT
4-13. INFLATOR GAGE HOSE REPLACEMENT.
WARNING
Close globe valve tightly to avoid personal injury.
4-18
