TM 5-4310-373-14
This task covers:
The installation of the intake and exhaust valves.
INITIAL SETUP
Equipment Condition:
Tools :
Valves removed
Main power OFF
Materials/Parts:
As required
Personnel Required:
Approximate Time Required (minutes):
1 Mechanic
15
LOCATION/lTEM
ACTION
REMARKS
INTAKE VALVES
1.
Valve seats
Clean.
See para 4-37.
Valve assembly, low
Install.
Valve assemblies must be installed with screw facing up.
2.
pressure intake (1)
Valve assembly gaskets may be either copper or aluminum.
NOTE
They are interchangeable.
Valve assemblies are not inter-
changeable.
Manifold, low pressure
3.
Install.
intake (2)
4.
Install.
Capscrews (3)
Tighten screws evenly.
Install.
Valve assembly, high
5.
pressure intake (4)
Manifold, high pressure
6.
Install.
intake (5)
7.
Install.
Capscrews (6)
Tighten screws evenly.
4-52
