TM 5-4310-376-14
4-26. FILLER TUBE, LUBRICATION SYSTEM
This task covers:
Removing and replacing the oil filler tube.
INITIAL SETUP
Equipment Condition
Tools
Tool Kit, General Mechanic,
Compressor not running.
Automotive, NSN 5180-00-177-7033
Parts
Cap and dipstick P/N 392295
Cable tie P/N 11-5307
Tube P/N 392655
Seal O-ring P/N 68838
Hose P/N 7-248
ACTION
REMARKS
LOCATION/lTEM
a. Remove clamp (1) and cable tie (2)
Oil filler tube
securing vacuum hose (3).
b. Remove mounting screw (4) from
cylinder shield (5).
c. Remove oil filler tube (6).
A leak at the seal between tube and crankcase cover, or
at seal at the upper end of dipstick can result in a loss of
crankcase vacuum, and a discharge of smoke through the
Be sure dipstick (8)
Oil filler tube
a. Install so that new O-ring (7) seal is
seats properly.
firmly compressed.
b. Install mounting screw (4) into cylinder
shield (5) and tighten.
4-54
